Gas Analyzer

Approx. Rs 17,860 / PieceGet Latest Price

Carbon monoxide is a particularly dangerous gas. It is colorless, it is odorless and above all it is lethal. That’s why it is so important that CO checks are carried out when a gas heating or boiler is being serviced or installed. This not only ensures that the heating or boiler is working properly; it also helps to prevent tragic accidents that occur as a result of carbon monoxide poisoning.

The testo 317-3 CO detector. for measuring carbon monoxide in the surrounding air

A few seconds. That’s all it takes. That’s all it takes to be on the safe side and test the surrounding air for carbon monoxide. The testo 317-3 CO detector measures the concentration of carbon monoxide in the surrounding air and presents the readings on an easy-to-read display. The CO detector has both a visual and an audible alarm which are triggered when a threshold is crossed. The thresholds can be adjusted individually.

The CO detector comes with a carry case and a belt clip to ensure that you always have your meter on you and a handstrap which can be wrapped loosely around the wrist to prevent the meter from falling onto the floor.

And as if that wasn’t enough, testo 317-3 CO detector also comes with a 3-year CO sensor warranty.

Additional Information:

• Delivery Time: 2-3 weeks

Approx. Rs 1,20,000 / PieceGet Latest Price

The testo 350 MARITIME exhaust gas analyzer is certified for measuring emissions at ship diesel engines, specifically for measuring gaseous exhaust concentrations of O2, CO, CO2, NOX and SO2. And so as to make sure that the testo 350 is shipshape and ready to sail the seven seas, the entire set comprising the exhaust gas analyzer and matching accessories can be tucked away safely inside a rugged case with trolley function.

The testo 350 MARITIME is an excellent piece of tackle designed for use as an on-board exhaust gas analyzer for carrying out verification inspections in compliance with NOx Technical Code 2008:

• For onboard measurements and monitoring (i.e. periodic and intermediate inspections)
• For basic inspections and measurements (i.e. after modifications like adjustments to engines)

The testo 350 MARITIME exhaust gas analyzer is also excellently suited for checking NOx thresholds as stipulated in MARPOL Annex VI. The NOx readings are routinely checked when NOx inspections are performed by the relevant authorities. NOx measurements can also serve as a means of providing proof of NOx reductions. Such proof is required in regional special zones where NOx tax is levied (like Norway for example).

Approx. Rs 75,000 / PieceGet Latest Price

Designed for especially for the use in Field.



The testo 310 entry-level Combustion analyzer for reliable combustion system checks

The testo 310 combustion analyzer has an easy-to-use menu guide, four integrated menus for flue gas, draft, CO ambient air and pressure measurements, a large, easy-to-read display and a backlight for use in all lighting conditions.

Direct O2 CO, flue gas and ambient temperature measurement.

Arge, blacklit digital display.

Rechargeable Lithium battery for 10 hours life.

The readings can also be transferred directly to your testo turbo printer (optional) via the combustion analyzer’s infrared interface, allowing you to print out on site.

Additional Information:

• Delivery Time: 1 to 2 weeks
• Packaging Details: Testo 310 Flue Gas analyzer, Rechargeable Battery, Calibration Certificate for O2, CO, psi and ¿¿F measurements, 7 in. conical sensor, silicone tube for pressure measurements, 10x particle filters, case.

Approx. Rs 1,57,733 / UnitGet Latest Price

The TÜV-tested testo 330-2 LL flue gas analyzer ensures that you have the proper tools for proper measurements for a proper long time! The easy-to-use, state-of-the-art analysis tool provides you with quick and reliable readings and is built to last for years to come.

• 4-year warranty on the flue gas analyzer
• Bigger savings with longlife (LL) sensors. Because the O2 and CO sensors need to be replaced less often (typically once every six years and therefore once less) you save on costs.
• Wide range of optional sensors (i.e. NO, COlow, NOlow sensors) that allow you to customize your analysis tool to suit your individual requirements and saves you from having to buy other flue gas meters or analysis tools
• Sensor connector for quick `n easy sensor change. All gas circuits can be connected to the analysis tool via a bayonet lock

• High-quality, longlife O2, CO and NO – O2- and CO sensors included
• Sensor connector for quick `n easy sensor change
• High-resolution graphic color display, graphic presentation of the course of the measurement with flue gas matrix and line diagram
• Wide range of measurement menus for heating systems analysis checks
• Integrated sensor monitoring; traffic light color coding system and at-a-glance status
• User-changeable sensors; easy-to-replace sensor filter
• No need to withdraw the sensor from the flue to zero (additional feature which the testo 330-1 LL does not have)
• Flue gas O

  Technical data
  Measuring range	0 to 21 Vol.%
  Accuracy	±0.2 Vol.%
  Resolution	0.1 Vol.%
  Reaction time t	< 20 s

  Flue gas CO (with H-compensation)

  Technical data
  Measuring range	0 to 8000 ppm
  Accuracy	±10 ppm or ±10 % of mv (0 to 200 ppm) ±20 ppm or ±5 % of mv (201 to 2000 ppm) ±10 % of mv (2001 to 8000 ppm)
  Resolution	1 ppm
  Reaction time t	< 60 s

  Flue gas NO

  Technical data
  Measuring range	0 to 3000 ppm
  Accuracy	±5 ppm (0 to 100 ppm) ±5 % of mv (101 to 2000 ppm) ±10 % of mv (2001 to 3000 ppm)
  Resolution	1 ppm
  Reaction time t	< 30 s

  Flue gas Draught

  Technical data
  Measuring range	-9.99 to +40 hPa
  Accuracy	±0.02 hPa or ±5 % of mv (-0.50 to +0.60 hPa) ±0.03 hPa (+0.61 to +3.00 hPa) ±1.5 % of mv (+3.01 to +40.00 hPa)
  Resolution	0.01 hPa

  Temperature

  Technical data
  Measuring range	-40 to +1200 °C
  Accuracy	±0.5 °C (0 to +100.0 °C) ±0.5 % of mv (Remaining Range)
  Resolution	0.1 °C (-40 to +999.9 °C) 1 °C (> +1000 °C)

Additional Information:

• Delivery Time: 1-2 Weeks from the Date of Purchase Order
• Packaging Details: Flue Gas Instrument, Flue Gas Measurement Probe, Mains Unit, Spare Filter, Pitot Tube, Software. Calibration Certificate for Separate Gases.

Approx. Rs 16,500 / PieceGet Latest Price

Additional Information:

• Delivery Time: 1-2 Weeks
• Packaging Details: Oxygen Gas Detector, User Manual, Battery.

Approx. Rs 2,00,000 / PieceGet Latest Price

Precise technology: That’s what you can rely on when you’re working out in the field. But precise technology is nothing if it is not versatile, easy to use and adaptable for use in the field. The testo 340 flue gas analyzer meets all these expectations and much more.
Industrial emission measurement with testo 340 flue gas analyzer
Which sensors do you need in the course of your daily work and which measurements do you normally need to carry out? The testo 340 flue gas analyzer comes standard-fitted with an O2 sensor and four more sensors (CO, COlow, NO, NOlow, NO2 or SO2 ) for you to choose from, allowing you to customize your flue gas analyzer to suit your individual demands. The analyzer’s compact design and the reliable technology ensure increased mobility, making it ideal for use in on-site service operations and for installing or carrying out checks on firing plants or energy production systems.

Additional Information:

• Delivery Time: 1-2 Weeks
• Packaging Details: testo 340 flue gas analyzer, calibration certificate, shoulder strap, O2 sensor and integrated flow and pressure difference measurements. Please note that your testo 340 must be fitted with a second gas sensor for it to work. Up to three additional sensors can be fitted.